The 9 Things Your Parents Taught You About Suzuki Ignis Key

How to Unstick a Suzuki Ignis Key

Suzuki's quirky, cheap little city car gets a midlife refresh. It's not a hot hatch, but it is able to eat the tarmac in rural and urban areas with gusto, while its clever turning circle makes driving in town easy.

The new model comes equipped with intelligent safety and driver assistance features - including lane depart warning and a sleepiness alarm, which are welcome additions on long drives.

Steering Lock

The steering lock is a security measure that prevents your Ignis from being stolen while in gear. It's a crucial safety feature however it can be a hassle when you have to go to a location and you are unable to unlock the wheel. There are a few easy things you can do to solve the issue.

Check first that the ignition switch is set to "on". If you're sure, try to turn the key in the direction you were turning it before the wheel was locked. It can be tricky but typically enough to unlock the wheel.

If the wheel isn't able to unlock after spraying canned air into the ignition cylinder, you may make sure that the cylinder is lubricated. Wear eye protection to prevent getting the canned air in your eyes. Liquid graphite can also be used to provide lubrication to the cylinder.

If none of these methods work, you'll need replace the ignition lock assembly. This part is easy to find in any auto parts store. Be sure to buy an identical replacement and then compare it to your old one before attempting to install it. Also, make sure to remove the cover that covers the ignition so that you can see and access the assembly.

Worn

The steering lock could cause the ignition switch to become stuck. This safety feature is designed to prevent your Ignis from moving while the engine is running. If this happens, turning the steering wheel will release it.

Over time, your ignition key can start to wear out and become more difficult to turn. This may not be the same as a faulty ignition switch, but it is a possibility that it will occur. If this is the case you need to change your ignition key.

You should also check if there's obstructions to your Ignis key from entering the ignition cylinder. There could be dirt or debris that can get stuck inside the ignition cylinder and block it from turning.

You should also try using a bit of oil to see if it can help. You can purchase a variety of lubricants in your garage or local auto parts store.

A silicon "glow-in-the-dark" key cover is another option. These covers absorb light and release it when the weather is murky or darker. They also protect your keys from wear and tear. They are available for most suzuki vitara key replacement models, and are available on the internet or at a local Suzuki dealership.

Bent

Over time and through repeated use, a key may become bent. The teeth of the key might not be able to connect with lock cylinders in the same manner. This can hinder the key from turning. In this situation you'll have to replace the key. If you have a spare car keys suzuki key, it's recommended to get it duplicated, and keep it in a safe location.

The cylinder for ignition can wear out. The lock pins inside may get stuck or stuck together, preventing the key from going all the way into or out of the ignition cylinder. Replacing the cylinder can solve this issue, but it's best to do it before your key gets stuck in the ignition, to avoid further damage.

If the keys of your Ignis remain stuck even after you've tried the more straightforward solutions it could be time to lubricate your cylinder. Graphite, or liquid graphite, will help the lock pins to move more freely and loosen your key. You can find this at most auto parts stores. When applying the lubricant, make sure that your Ignis remains in park and do not attempt to manipulate it to loosen it. This could result in more serious issues.

Broken

If you've tried a variety of methods to make a key unstick but it doesn't move, the last resort is to apply lubricant to make it move. You can purchase this lubricant at a local auto parts store and apply it using either a cotton swab, or an abrasive to the inside of the lock cylinder. Try again. Move the key forwards and backwards gently to spread the lubricant. You can try pushing it forward, but take care not to press too hard, as you could cause damage to the cylinder.

It's also possible that the internal circuitry of the key may become inactive over time. It's not as common and usually means that you'll need to have the key duplicated to make room for another one.

Finally, the case of the case of your suzuki swift car key replacement key fob could become damaged or worn. This is more likely when you use a cheaper key fob replica that has a plastic or rubber shell. Depending on the situation, The Key Crew can sometimes move the internal circuitry from the old key fob to an alternative shell case, saving you from having to pay for an entirely new key fob. When we call you to set up your service, we'll let you if this is a viable alternative.