5 Repairs To Upvc Windows Myths You Should Avoid

Repairs to uPVC Windows

upvc window repair windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good condition.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the old frame very easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the old panes. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window repairs frame.

If you plan to try to remove the window panes yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall on the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will prevent drafts and water from getting into your home until a professional is able to repair the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap is particularly large, you might be interested in a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, with time, they are susceptible to a range of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges could help fix a window that is sagging. First, you'll need to open the windows so you can reach the frame. After that, using a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and verify the fit. If you're satisfied with the fit of your window, tighten the screws to secure them in the right position.

If you are unable to reposition the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles can also become loose. The majority of the time it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's a good thing that it's simple to fix the loose upvc window repair window handle yourself. First, you'll need close the window and perform a test to ensure that it fits. The corners of the sash need to align with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

It is important to take action if you awake each day to find a smoky wall and wet floors. Water leaks from windows can not only cause degradation of your home's structure but also undermine your efforts to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

This is an easy fix that can be done by any DIYer who has the ability. Depending on how severe the issue is, old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with a breeze It could be hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component hinges are prone to be damaged over time. The process of replacing a hinge on a window is essentially a very simple process, but it's easier to do when you have a person to assist in holding the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. You can check this by looking for the arrow on each hinge. This shows which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or by improper installation in the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be happy to give you advice.

Regular lubrication of the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It can also reduce the chance of windows getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges, also due to wear and tear could become misaligned. This can cause an opening to appear where the sash meets the frame. If they are beyond repair, it might be necessary to have them realigned. The interlock, which is located on the hinge of the window repairs, may also be misaligned, and again it is possible to give them a clean but in certain cases, it may be necessary to have these replaced.

The seals may wear out or be damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and will reduce the risk of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security for your home with regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and eventually, they will reach an point at which it is more efficient to replace them than repair them. If you have any problems with your upvc window you should consult an expert as soon as you can.