10 Things Everyone Hates About Repairs To Upvc Windows Repairs To Upvc Windows

Repairs to uPVC Windows

upvc window repairs is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good shape.

For single pane windows, it is relatively easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. However, if windows with double panes are held in place by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this situation, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the glass so that any fragments of glass fall on the fabric rather than on the floor, where they could be trodden under and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional can come out and repair the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap is large, you might be interested in the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. However, with time, they are susceptible to a range of issues, including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. If you notice that your uPVC window repairs is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows so you can reach the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close your window and test it for fit. If you're satisfied with the fit of the window, you can tighten screws to hold them in place.

If you are unable to move the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes their tightness to decrease. It is important to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles could also loosen. This is usually due to screws that have loosened over time, but it can also be due to the mechanism of the handle wearing out. Fortunately, it's easy to fix the loose upvc window repairs window handle yourself. First, you'll need to shut the window and do an initial fitting. The joint at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. The most common reason for leaking upvc window repair near me windows is that the sealant surrounding the frame is either damaged or missing.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the issue is, the old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes have no debris in them and that the sill pan is properly angled to allow the water to drain from the window. In more extreme situations, you may have to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open in a breeze it could be hinges that are at fault. Any competent DIYer can replace the hinges in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. The process of replacing a hinge on a window is an easy process, but it's simpler with someone else to help hold the frame in place.

Check that the uPVC hinges are open and closed in the right direction. This can be done by looking for the arrow on each hinge. This indicates the direction in which the window should be opened.

The issue could be caused either by opening the window improperly or due to a poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are more than happy to provide assistance.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal way to do this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the chance of windows getting stuck and stop corrosion. It is recommended to perform this every year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges may also become disaligned as a result of wear, which can cause gaps where the sash and frame meet. This can be easily repaired by giving them thorough clean, however if they are beyond repair it could be necessary to get them realigned or replaced. Secondly the interlock, this is located on the hinge of the window and can also be misaligned, and again it's possible to just give them a clean but in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts is window seals, these are prone to wear or damaged over time and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen the possibility of draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder. These are typically fabric tubes filled with some sort of filler and can be put on the top of your windowsill. These will keep your home warm by blocking cold air.

With a little maintenance and repair, your upvc windows will provide an excellent level of insulation and security for your home. It is crucial to recognize that all windows have a life span and there may come a point where it is more efficient to replace them than repair them. So, if you are having issues with your upvc windows, it is recommended to seek help from a professional as soon as possible.