See What Ghost Immobiliser Problems Tricks The Celebs Are Using

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions from theft by using the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs.

The device uses buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin code sequence that can be modified up how to become a autowatch ghost installer 20 times. This allows your vehicle to begin.

Simple PIN Code Change Process

Many homeowners are upgrading their security due to the rise in vehicle theft. There are many kinds of security gadgets that are sold aftermarket including tracking systems, alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. While a tracking device can help you find your vehicle in the case of theft, it will not stop the crime from happening in the first place. An immobiliser, on contrary is exactly what says on the label: it shuts off the engine of your vehicle to prevent it from being started. The Autowatch Ghost is one of the most sophisticated options available, making it virtually impossible for thieves to steal your car.

Utilizing the buttons already in your car The ghost device generates a unique sequence which must be entered prior to the engine will start. This can be done by using the window, heater or indicator stalk buttons. In addition option, there is an app on mobile that can act as an emergency PIN code override, allowing the driver to operate the car without using the button sequence. This is a great solution when you wish to donate your car to valet parking or for maintenance. The immobiliser will remain in operation.

The Ghost is an innovative and unique device that works with the buttons of your vehicle instead of as a standalone device. It's not just an effective deterrent for vehicle theft, but it can be used on future vehicles you may own. This makes it a far better investment than a conventional wheel lock.

Weatherproof, tiny device

The Autowatch ghost immobiliser is an advanced security device that protects your car from key cloning, hacking and ECU swapping. It's a small weatherproof device that connects with the ECU of your vehicle directly via the CAN bus to stop the motor. It can be fitted into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also immune to jamming devices which are a typical technique that car thieves use to bypass immobilisers.

The benefit of CAN data over traditional systems is that they operate silently. It isn't detected by sophisticated RF scanning and code-grabbing technologies and cannot be detected by traditional diagnostic tools. The Autowatch Ghost does not use LED indicators and instead uses buttons in your vehicle, like the steering wheel, the centre console, or door panels, to create a an unique sequence of disarming. You can even make this sequence as long as 20 presses for added security. The iPhone app lets you make only one, authenticated connection with a pairing code that is unique to the ghost 11 immobiliser and communication between the two is encrypted.

The Ghost prevents car thieves adding an ignition key replacement or replacing the ECU in order to bypass the immobiliser. The engine will only run when a valid PIN code has been entered. It is possible to operate temporarily in valet or service mode (with parameters set, such as a 30mph speed limit) which means you can give your car to valet or service without entering the code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser that can be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device intercepts signals to stop your car from starting normally until you enter a custom code. The system can be turned on or off by using your smartphone app without the need for extra wires.

The factory-installed immobilisers function with a transponder which is integrated into the key. This sends a message to the ECU. If the correct code is transmitted, the car will start however, if the transponder is replaced by one from a different vehicle, the immobiliser will not recognise it. This allows the vehicle be stolen and started. The Ghost immobiliser was developed by an South African company at the top of security systems for vehicles technology. It protects you from hacking or key cloning and even key theft. Only by physically towing your vehicle away from thieves could they get it, and they would still not be able to drive the vehicle.

Ghost immobiliser problems makes use of the buttons on your car, such as the indicator stalk along with the steering wheel, indicator stalk and door panels to create a unique PIN sequence that can be changed that must be entered before you are able to use your car. This is performed without the need for additional hardware like keys-fobs, and can be up to 20 presses long. It is also inaccessible to equipment for diagnostics and does transmit radio frequency signals, which means thieves cannot use sophisticated RF scanners or code-grabbing techniques to determine if an installation has been made.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks Ghost is covertly integrated into the vehicle to ensure that it can't be removed or disabled by thieves and is more difficult to remove than a car alarm that requires disarming using a button sequence. This makes it a fantastic alternative to a GPS tracking device that can be used to locate your vehicle after it's stolen.

Override of emergency PIN code

You do not have to look far on social media to see stories or even videos of vehicles that have been stolen by thieves using the most advanced technology tools available to them. This includes key-cloning and hacking tools that allow the vehicle to start without the original keys.

Our Ghost immobiliser fights this and gives you an additional layer of security to stop your vehicle from being taken if it is targeted by thieves. It creates a unique pin code push sequence using your buttons on the steering wheel, door panel, and the center console. This unique PIN has to be entered in conjunction with your original key fob in order to stop the vehicle from getting started. The unique override pin is found on a black card that you receive following the installation. It is easy to remember because there are no LED indicators.

The device is hidden in the vehicle's wiring and does not emit radio signals, so it cannot be recognized by thieves using diagnostic software that is able to identify the security system you have installed. This makes it an excellent alternative to an electronic device for tracking.

Contrary to most security systems, which have a relay in the engine bay, CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable the vehicle completely through an electronic block of commands for both the ECU and the engine.

It is also possible to connect a separate analog immobiliser, alarm, or tracker to these systems, however this must be specified prior to installing the device. They are also compatible with valet/service modes and is a great alternative to a tracker device when you bring your vehicle to the dealer to address an electrical problem.

Service/Valet mode

In recent times, there has been a rise in the number of vehicles being stolen without the owners keys. It's now easier than ever to steal your pride & joy thanks to the availability of key cloning tools and door lock picks. To combat this we have launched the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys were cloned or your vehicle was stolen.

It communicates directly to your cars ECU (Engine Control Unit) through the CAN data circuit. It's completely silent since it doesn't use radio frequencies or key fobs. This means that it can't be detected by diagnostics or other car hacking devices. It also protects against adding a new key or replacing the ECU to get around the system as only the correct PIN code can allow the engine to start.

The device is hidden within your car by using buttons on the steering wheel, centre console & door panels. A unique and reversible PIN code sequence that can be as long as 20 digits must be entered prior to being able to start your car stolen with ghost immobiliser.

This is the very first aftermarket CAN-bus immobiliser that has been created. It will stop your vehicle from being driven or even started in the event that you do not enter a PIN number first. If the device is armed and you attempt to drive off it will display a warning on your dash, which will flash continuously for about 300m. If you enter your PIN code at this point, it will disable the anti-hijack and your car will continue to drive as normal. If you do not enter your PIN at this point, the indicator will continue to flash and require a new PIN code for every attempt to start your car.