See What Ghost Immobiliser Problems Tricks The Celebs Are Using

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your valuable item from theft. This system is discrete and doesn't require additional key fobs.

The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin code sequence that can be modified up to 20 times. This will then allow the start-up of your vehicle.

Simple change of PIN code

Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are a variety of aftermarket security devices including tracking systems, alarms and immobilisers. They're not all equally effective in protecting your car. A tracking device can help you locate your vehicle if it's stolen however it cannot prevent the crime. An immobiliser, on other hand is exactly what says on the tin: it disables the engine of your car so that it is unable to be started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves to steal your car.

Using the existing buttons in your car, the range rover vogue ghost installer device creates an exclusive sequence that has to be entered before the car's engine will start. This can be done by using the window, heater or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their car without the need to use the button sequence. This option is particularly useful when you need to hand your car over to a valet service or parking since the immobiliser will still be active and not deactivated.

The ghost Immobiliser Problems is a very unique and innovative device that is used in conjunction with the buttons on your vehicle instead of being a separate unit. It is not only an effective deterrent to theft of your vehicle however, it can be used on future vehicles you own. This makes it a better investment than a conventional wheel lock.

Small, weatherproof device

The Autowatch bmw m4 ghost installer Immobiliser is a sophisticated security system that protects your vehicle from key cloning and hacking. It also blocks ECU swapping. It's a small weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus to disable the motor. It can be plugged into the vehicle without the need for additional wiring, and has been thoroughly tested to ensure that it is compatible with all vehicles. It also is resistant to jamming devices which are a typical method used by car thieves to bypass immobilisers.

The benefit of CAN data over traditional systems is that they operate silently. It isn't detected by sophisticated RF scanning or code-grabbing technology and is also unrecognizable by traditional diagnostic tools. The Autowatch Ghost does not employ LED indicators and instead uses buttons in your vehicle, such as the steering wheel, centre console, or door panels, to create an unique sequence of disarming. This sequence can be extended by up to 20 presses for extra security. The iPhone app allows a single, authorised connection using a pairing code that is unique to the ghost autowatch immobiliser and the communication between the two is encrypted.

The Ghost also stops thieves from stealing a new key or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to start if the correct PIN code is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can transfer your vehicle to a valet service or for maintenance without having to enter a pin code.

Every vehicle is tested

The Autowatch Ghost is a world-first aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device snoops on electronic signals that block your car's system from going through its normal startup routine until you input a custom passcode. The system can be turned on or off via your smartphone's app without the need for additional wires.

The factory-installed immobilisers function with a transponder which is embedded in the key. It transmits a message to the ECU. The car will start when the correct code is transmitted. However, if a transponder from another vehicle is used instead, the immobiliser will not recognize it. This allows the vehicle to be stolen and then started. The ghost installers near me immobiliser was developed by an South African company at the top of the line in vehicle security technology. It safeguards your car from hacking, key cloning and even key theft. The only way thieves could steal your vehicle is physically towing it away and even then, they wouldn't be capable of driving it.

Ghost makes use of buttons on your vehicle, including the indicator stalk, steering wheel, and door panels, to create an individual PIN code that must be entered to use your vehicle. This is performed without the need for additional hardware like a key-fob and can be as long as 20 presses long. It is also inaccessible to diagnostic equipment and does not transmit radio frequency signals so thieves cannot make use of sophisticated RF scanning or code-grabbing technology to discover that the security system has been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks ghost installation is concealed within the vehicle so it can't be disabled or removed by thieves and is even more difficult to get rid of than a car alarm, which requires disarming using an action sequence. This makes it a great addition to a GPS tracking device which can be used to locate your vehicle after it's stolen.

Emergency PIN code override

You don't need to look too far on social media sites to find stories or even videos of vehicles that were stolen by car thieves employing the most advanced technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow thieves to start the vehicle without your original keys.

Our Ghost immobiliser combats this and provides you with an additional layer of security to prevent your vehicle from being taken when it is targeted by thieves. It creates a unique pin code when pushing the buttons on your steering wheel, door panel, and on the centre console. The unique pin code is entered alongside your original key fob in order to stop the engine from beginning. The unique override pin is found on a black card that you receive following your installation. It is easy to remember since there aren't any LED indicators.

The device is hidden within the vehicle's wiring and doesn't emit radio signals. This means it can't be detected using diagnostic software that can tell the security system you have installed. This makes it a great alternative to a tracker.

Contrary to most security systems that use an engine relay bay these CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable a vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analogue immobiliser, alarm or tracker to these systems but this must be specified prior to installing the device. They are also compatible with valet and service modes, and are is a great alternative to a tracking device if you take your car to the dealer to address an electrical problem.

Service/Valet Mode

In recent times, there has been a rise in the number of vehicles being stolen without the owners keys. It's now more easy than ever to steal your pride & joy due to the availability of key cloning devices and door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It stops your car from being driven, even if you keys have been cloned.

It directly communicates with your car's ECU (Engine Control Unit) via the CAN data loop. It's completely silent since it doesn't use radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also prevents the user from using an ECU or key to circumvent the system, as only the PIN code allows the engine to start.

The device is hidden in your car and is accessed by existing buttons on your steering wheel, centre console, and door panels. Before you can start your vehicle, you must enter a unique and changeable PIN code up to 20 digits.

This is the very first aftermarket CAN bus immobiliser that has been created. It will stop your vehicle from being driven or started in the event that you do not enter a PIN code first. If you are driving away with the device armed it will display an indicator on your dashboard that will flash continuously for around 300m. Entering your PIN code will turn off the anti-hijack. Your vehicle will continue to operate as normal. If you do not enter your PIN at this time, the indicator will continue to flash and require a new PIN code every time you attempt to start your car.